Dynamic fatigue testing machine
Electronic universal testing machine
Electro-hydraulic servo universal testing machine
Automated test scheme
Pendulum impact testing machine
Drop hammer impact testing machine
High temperature creep endurance testing machine
Horizontal testing machine
Special testing machine
Standard machine
Spring testing machine
Electric insulator testing machine
Fastener testing machine
Function summary
HCT-G microcomputer controlled hybrid servo pressure testing machine is specially designed for high strength concrete compressive test. It adopts four-column frame structure and has good rigidity。Adopt imported gear pump and servo motor,Quick response,hypopyrexia,Low noise advantage,Within the range permitted by the testing machine,Users can arbitrarily set the loading speed according to the requirements of the test;The force measuring device adopts oil pressure sensor,Compared with traditional column sensors,It can greatly reduce the deformation of the whole machine during the test and the vibration during the test failure;This series of testing machine is also suitable for the compressive strength test of cement, concrete and rock,With proper fixture and measuring device, it can also meet the splitting test and static pressure elastic modulus test of concrete,Multiple displacement measurement channels can be extended according to user requirements。The control system has a closed loop force control oil-electric hybrid pressure testing machine with constant stress control and load holding functions。
Relevant standard
GB/T 2611 "General Technical Requirements for Testing Machine"
GB/T50081 Standard for Test method of Mechanical Properties of ordinary Concrete
JJG 139 "Tensile, pressure and universal testing machine verification Regulations"
Technical parameter
Specification and model | HCT206G |
Maximum load (kN) | 2000 |
Accuracy class | 1级 |
Relative error of test force indication value | ±1%以内 |
Test force measurement range | 5%-100% FS (all ungraded) |
Deformation resolution | 1/500000 of the maximum deformation |
Maximum piston moving speed (mm/min) | 78 |
Test force loading rate range | 0.02%-2%FS/s |
Host structure | Four-column construction |
Distance between columns (mm) | 350 |
Upper and lower pressure plate distance (mm) | 320 |
Upper and lower pressure plate distance adjustment mode (mm) | Plate adjustment |
Piston direction control | Single acting plunger cylinder |
Pressure plate size (mm) | Φ300 |
Piston stroke (mm) | 60 |
Main machine dimensions (L × W × H, mm) | 780x630x1505 |
Oil source dimensions (L × W × H, mm) | 515x875x1050 |
Total power (kW) | Three-phase five-wire 380VAC± 10%, 50Hz,3.8kW |
Weight (kg) | 约1750 |
Sweep for immediate attention
Copyright @ Shenzhen wance Test Equipment Co., Ltd. Copyright(C)2024 wance Technologies Ltd.
All Rights Reserved Guangdong ICP number 15055763